Atmospheric Environment Tubes
Compressed Breathing Air Tubes
Criminal Investigation Tubes
Dissolved Substances in Solutions
H2S Generation Tubes
High Sensitivity for Galleries
Indoor Air Pollutants
Qualitative Tubes

Special Application Tubes

Refine by Name

  • ALL
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z

Showing all 41 results

  • 131 INORGANIC GAS - QUALITATIVE

    • Applications: Qualitative analysis, emergency and disaster scenes. 
    • Quantity: 10 tubes per box
    • Note: This qualitative detector tube enables detection of a range of inorganic gases as it contains different reagents at mutiple sections within the tube. The main purpose for this tube is qualitative analysis but simple quantitative analysis of the gases is also possible. This tube is of benefit where the user needs to establish firstly if there is gas within an environment and secondly, which type of gas. Therefore tube 131 is regularly used at emergency scenes.
    • 131
     
  • 186B ORGANIC GAS - QUALITATIVE

    • Applications: Qualitative analysis, emergency and disaster scenes
    • Quantity: 10 tubes per box
    • Note: This qualitative detector tube enables detection of a range of organic gases as it contains different reagents at mutiple sections within the tube. The main purpose for this tube is qualitative analysis but simple quantitative analysis of the gases is also possible. This tube is of benefit where the user needs to establish firstly if there is gas within an environment and secondly, which type of gas. Therefore tube 186B is regularly used at emergency scenes.
    • 186B
     
     
     
  • 200SA SULPHIDE ION (2-1,000ppm)

    • Applications: Waste water analysis in pulp & paper mills, petroleum refineries, chemical industries, waste disposal plants, water treatment plant
    • Range: 2-1,000ppm
    • Quantity: 10 tubes per box
    • Note: Uses immersion method by immersing part of the detector tube into the sample liquid. 200 series
     
  • 200SB SULPHIDE ION (0.5-10ppm)

    • Applications: Waste water analysis in pulp & paper mills, petroleum refineries, other chemical industries, waste disposal plants, water treatment plant
    • Range: 0.5-10ppm
    • Quantity:10 tubes per box
    • Note: Uses immersion method by immersing part of the detector tube into the sample liquid. 200 series
     
  • 201SA CHLORIDE ION (10-2,000ppm)

    • Applications: Detection of salt water in marine lubrication oils; impurity test; testing portable water supply
    • Range: 10-2,000ppm
    • Quantity: 10 tubes per box
    • Note: Uses immersion method by immersing part of the detector tube into the sample liquid. 200 series
     
  • 201SB CHLORIDE ION (3-200ppm)

    • Applications: Detection of salt water in marine lubrication oils; impurity test; testing portable water supply
    • Range: 3-200ppm
    • Quantity: 10 tubes per box
    • Note: Uses immersion method by immersing part of the detector tube into the sample liquid. 200 series
     
  • 201SC CHLORIDE ION (1-60ppm)

    • Applications: Detection of salt water in marine lubrication oils; impurity test; testing portable water supply
    • Range: 1-60ppm
    • Quantity: 10 tubes per box
    • Note: Uses immersion method by immersing part of the detector tube into the sample liquid. 200 series
  • 203S COPPER ION (1-100mg/L)

    • Applications: Waste water analysis in pulp & paper mills, petroleum refineries, other chemical industries, waste disposal plants, water treatment; school hygiene
    • Range: 1-100mg/L
    • Quantity: 10 tubes per box
     Rubber ball available (optional extra)
     
  • 204S CYANIDE ION (0.2-5.0ppm)

    • Applications: KCN & NaCN in water
    • Range: 0.2-5.0ppm
    • Quantity: 10 tubes per box
     Rubber ball available (optional extra)
     
  • 205SL SALINITY (0.01-0.80%)

    • Applications: Detection of salt water in marine lubrication oils, impurity test, testing portable water supply
    • Range: 0.01-0.80%
    • Quantity: 10 tubes per box
     Rubber ball available (optional extra)
     
  • 234SA FREE RESIDUAL CHLORINE (0.4-5.0ppm)

    • Applications: Detection of dissolved chlorine for disinfection & sterilisation of swimming pools, etc.
    • Range: 0.4-5.0ppm
    • Quantity: 10 tubes per box
     
  • 290CN HYDROGEN CYANIDE IN BLOOD (2-30mg/L)

    • Applications: Screening test for identification of cause of death
    • Range: 2-30mg/mL
    • Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
     
  • 290CO CARBON MONOXIDE IN BLOOD (20-90%COHb)

    • Applications: Screening test for identification of cause of death
    • Range: 20-90%COHb
    • Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
     
  • 290EA ETHYL ALCOHOL IN BLOOD (0.2-2.0mg/mL)

    • Applications: Screening test for identification of cause of death
    • Range:0.2-2mg/mL
    • Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
     
  • 290HS HYDROGEN SULPHIDE IN BLOOD (0.1-1.0μg/mL)

    • Applications: Screening test for identification of cause of death
    • Range: 0.1-1.0μg/mL
    • Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
     
  • 290P DETECTOR TUBE FOR CRIME INVESTIGATION

    • Applications: Discriminate Gasoline and/or Kerosene
    • Range: N/A
    • Quantity: 10 tubes per box
     
  • 290PII DETECTOR TUBE FOR CRIME INVESTIGATION

    • Applications: Discriminate Gasoline and/or Kerosene
    • Range: N/A
    • Quantity: 10 tubes per box
     
  • 290PQ PARAQUAT DICHLORIDE IN BLOOD

    • Applications: Screening test for identification of cause of death
    • Range: N/A
    • Quantity:10 tubes per box
     
  • 296HA 296HA H2S Generation Tube

     
    • Applications: H2S generation tube
    • Quantity:10 tubes per box
    This tube is for use with the H2S-1/H2S-2 Calibration Gas Set for Hydrogen Sulphide which is designed for generating calibration gas for H2S detection monitors or H2S detector tubes.
  • 296KY 296KY H2S Absorbent Tube

     
    • Applications: H2S absorbent tube
    • Quantity:10 tubes per box
    For use with the H2S-1/H2S-2 Calibration Gas Set for Hydrogen Sulphide, this absorbent tube is used for disposing of surplus hydrogen sulphide gas after calibrating hydrogen sulphide measuring instruments.
  • 600SP COMPRESSED BREATHING AIR (CO) (2.5-100ppm)

    • Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
    • Range: 2.5-100ppm Carbon Monoxide CO
    • Quantity: 10 tubes per box
    • Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
     
  • 601SP COMPRESSED BREATHING AIR (CO2) (100-3,000ppm)

    • Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
    • Range:  100-3,000ppm Carbon Dioxide CO2
    • Quantity: 10 tubes per box
    • Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
     
  • 602SP COMPRESSED BREATHING AIR (OIL MIST) (0.3-5mg/m3)

    • Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
    • Range: 0.3-5mg/m3 Oil Mist
    • Quantity: 10 tubes per box
    • Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
     
  • 603SP2 COMPRESSED BREATHING AIR (H2O) (100-1000ppm)

    • Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
    • Range: 100-1000ppm water vapour
    • Quantity: 10 tubes per box
    • Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
     
  • 603SPA COMPRESSED BREATHING AIR (H2O) (20-160mg/m3)

    • Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
    • Range: 20-160mg/m3 water vapour
    • Quantity: 10 tubes per box
    • Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
     
  • 604SP COMPRESSED BREATHING AIR (O2) (2-24%)

    • Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
    • Range: 2-24% Oxygen O2
    • Quantity: 10 tubes per box
    • Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R. A 50mL plastic syringe and a 1m vinyl tube are optional accessories for 604SP (not included).
     
  • 710 FORMALDEHYDE (0.01-0.48ppm)

    • Applications: Indoor Air Pollutants
    • Range: 0.01-0.48ppm
    • Quantity: 20 tubes per box
     
  • 710A FORMALDEHYDE (0.05-2.00ppm)

    • Applications: Indoor Air Pollutants
    • Range: 0.05-2.00ppm
    • Quantity: 20 tubes per box
     
  • 713 FORMALDEHYDE (0.01-0.50ppm)

    • Applications: Indoor Air Pollutants
    • Range: 0.01-0.50ppm
    • Quantity: 20 tubes per box
     
  • 721 ETHYL BENZENE ETHYL BENZENE (0.05-1.20ppm)

    • Applications: Indoor Air Pollutants
    • Range: 0.05-1.20ppm
    • Quantity: 2x10 tubes per box
     
  • 721 TOLUENE TOLUENE (0.05-1.00ppm)

    • Applications: Indoor Air Pollutants
    • Range: 0.05-1.00ppm
    • Quantity: 2x10 tubes per box
     
  • 721 XYLENE XYLENE (0.1-1.4ppm)

    • Applications: Indoor Air Pollutants
    • Range: 0.1-1.4ppm
    • Quantity: 2x10 tubes per box
     
  • 730 P-DICHLOROBENZENE (0.01-0.40ppm)

    • Applications: Indoor Air Pollutants
    • Range: 0.01-0.40ppm
    • Quantity: 2x10 tubes per box
     
  • 740 NITROGEN DIOXIDE (0.01-0.20ppm)

    • Applications: Atmospheric environment measurement
    • Range: 0.01-0.20ppm
    • Quantity: 10 tubes per box
     
  • 750 TRICHLOROETHYLENE (30-920ug/m3)

    • Applications: Atmospheric environment measurement
    • Range: 30-920μg/m3
    • Quantity:2x10 tubes per box
     
  • 760 TETRACHLOROETHYLENE (30-920ug/m3)

    • Applications: Atmospheric environment measurement
    • Range: 30-920μg/m3
    • Quantity: 2x10 tubes per box
     
  • 770 HYDROGEN FLUORIDE (0.05-1.0ppm)

    • Applications: Industrial hygiene
    • Range: 0.05-1.0ppm
    • Quantity: 10 tubes per box
     
  • 77S WATER CONTENT IN SOLVENT (10-400mg/L)

    • Applications: Detection of water content in solvent
    • Range: 10-400mg/L
    • Quantity: 10 tubes per box
     
  • 900NHH AMMONIA IN ART GALLERIES-MUSEUMS (10-8μg/m3)

    • Applications: For cultural property protection in art galleries and musuems
    • Range: 10-80μ/m3
    • Quantity: 10 tubes per box
     
  • 901NHL AMMONIA IN CLEAN ROOM (1-12μg/m3)

    • Applications: For clean room monitoring of semiconductor industries
    • Range: 1-12μg/m3
    • Quantity: 10 tubes per box
     
  • 910 ORGANIC ACID (20-800μ/m3)

    • Applications: For cultural property protection in art galleries and musuems
    • Range: 20-800μ/m3
    • Quantity: 10 tubes per box