Detector Tubes
The KITAGAWA GAS DETECTOR TUBE SYSTEM is trusted by industries worldwide to detect gases and vapours, simply and reliably, without the need for calibration effort or power supply.
- Kitagawa Gas Detector Tube System
- Lightweight, compact and easy to carry
- Simple to operate for all personnel
- An accurate reading obtained in a few minutes
- Can be used in flammable atmospheres
- Needs no calibration or power supply
The Komyo Kitagawa Gas Detector Tube System is an accurate and cost-effective spot gas detector sampling system, offering over 300 gas detector tubes, from Ammonia to Xylene.
For the complete catalogue of products, download the current Kitagawa Gas Detector Tube System Brochure.
AP20 Sampling System
Sampling system for use with the Kitagawa detector tubes. Includes sampling pump with integral sample time indicator, precision volume sample locking mechanism, glass tube tip cutter and fragment container plus carrying case, 2 pcs of rubber tube connector, 1 pc of grease and an instruction booklet.
Detector Tubes
Detector tubes for the Kitagawa AP20 sampling system. Over 300 gas and vapour detection tubes are available for the sampling pump. Each box contains 10 detection tubes to enable 10 gas measurements (or 5 measurements for specialist applications with pretreat tubes).
Special Detectors & Accessories
A range of gas samplers and extras for specialist applications. From extension hoses for confined areas to sampling soil probes to compressed breathing air sampling to flue gas sampling, the Kitagawa extended range offers specialist solutions for your gas detection needs.
Showing all 418 results
- 100 CARBON MONOXIDE (5-1000ppm)
- Applications: Gas manufacture; blast furnace; garages; car parks; tunnels; atmospheric pollution survey; combustion of coal gas
- Range: 5 - 1000ppm
- Quantity: 10 tubes per box
- Note: Concentration chart method
- 101S ACETYLENE (50-1000ppm)
- Applications: Process control and leakage detection in synthetic ammonia plant; cuprammonium rayon process
- Range: 50-1000ppm
- Quantity: 10 tubes per box
- 102SA ACETONE ACETONE (0.1-5.0%)
- Applications: Leakage and fire hazard detection in acetate rayon industry, paints industry and pharmaceutical industry
- Range: 0.1-5.0%
- Quantity: 10 tubes per box
- 102SA TETRAHYDROFURAN TETRAHYDROFURAN (0.2-5.0%)
- Applications: Fire hazard detection in paints industry, painting, petrochemical industry and industrial hygiene
- Range: 0.2-5.0%
- Quantity: 10 tubes per box
- 102SC ACETONE (0.01-4.0%)
- Applications: Leakage and fire hazard detection in acetate rayon industry, paints industry and pharmaceutical industry
- Range: 0.01-4.0%
- Quantity: 10 tubes per box
- 102SD ACETONE (20-5000ppm)
- Applications:Industrial hygiene for both plant and laboratory
- Range:20-5000ppm
- Quantity:10 tubes per box
- 103SA SULPHUR DIOXIDE (0.1-3.0%)
- Applications:Process control in sulphuric acid paint (chemical manufacturing)
- Range: 0.1-3.0%
- Quantity:10 tubes per box
- 103SB SULPHUR DIOXIDE (0.02-0.30%)
- Applications:Process control in sulphuric ore calcination
- Range: 0.02-0.3%
- Quantity: 10 tubes per box
- 103SC SULPHUR DIOXIDE (20-300ppm)
- Applications: Metal refining; manufacturing sulphuric acid and nitric acid; waste gas analysis
- Range: 20-300ppm
- Quantity: 10 tubes per box
- 103SD SULPHUR DIOXIDE (1-60ppm)
- Applications:Metal refining; manufacturing sulphuric acid and nitric acid industrial hygiene
- Range: 1-60ppm
- Quantity: 10 tubes per box
- 103SE SULPHUR DIOXIDE (0.25-10ppm)
- Applications:Metal refining; manufacturing sulphuric acid and nitric acid; waste gas analysis
- Range: 0.25-10ppm
- Quantity: 10 tubes per box
- 103SF SULPHUR DIOXIDE IN FLUE GAS (0.02-0.30%)
- Applications:Flue gas analysis in heat power plant (with moisture control tube)
- Range: 0.02-0.3%
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 103SG SULPHUR DIOXIDE-IN CARBON DIOXIDE (0.1-25ppm)
- Applications:Process control in beverage industry
- Range: 0.1-25ppm
- Quantity: 10 tubes per box
- 104SA ETHYL ALCOHOL (0.05-5.0%)
- Applications:Fire hazard detection in hospital, laboratory, pharmaceutical industry, manufacturing perfumes and cosmetics
- Range: 0.05-5.0%
- Quantity: 10 tubes per box
- 104SB ETHYL ALCOHOL (20-300ppm) - CHROMIUM-FREE
- Applications:Environmentally friendly Chromium-free tube to measure low range airborne concentration of Ethyl Alcohol for safety in workplace environments, including hospitals and laboratories.
- Range: 20-300ppm
- Quantity: 2 x 5 tubes (5 detector tubes and 5 pre-treat tubes= 5 measurements)
- 104U ETHYL ALCOHOL (20-1000ppm)
- Applications:To measure low range airborne concentration of Ethyl Alcohol for safety in workplace environments including hospitals and laboratories
- Range: 20-1000ppm
- Quantity: 10 tubes per box
- 105SA AMMONIA (0.5-10%)
- Applications:Process control and leakage detection in synthetic ammonia plant; cuprammonium rayon process; fertilizer manufacturing
- Range: 0.5-10%
- Quantity: 10 tubes per box
- 105SB AMMONIA (50-900ppm)
- Applications: Process control
- Range: 50-900ppm
- Quantity: 10 tubes per box
- 105SC AMMONIA (5-260ppm)
- Applications:Synthetic ammonia plant; leakage detection of refrigerant in ice plant; industrial hygiene
- Range: 5-260ppm
- Quantity:10 tubes per box
- 105SD AMMONIA AMMONIA (0.2-20ppm)
- Applications: Synthetic ammonia plant; leakage detection of refrigerant in ice plant; industrial hygiene
- Range: 0.2-20ppm
- Quantity: 10 tubes per box
- 105SD BUTYL AMINE BUTYL AMINE (1-20ppm)
- Applications: Organic synthesis intermediate; manufacturing insecticide; emulsifying agent; medicine
- Range:1-20ppm
- Quantity:10 tubes per box
- 105SD CYCLOHEXYL AMINE CYCLOHEXYL AMINE (1-20ppm)
- Applications:Organic synthesis; plasticizer; rubber processing; corrosion inhibitor; dye; dry-clean detergent; manufacturing emulsifying agent
- Range:1-20ppm
- Quantity:10 tubes per box
- 105SD DIBUTYL AMINE DIBUTYL AMINE (2-20ppm)
- Applications:Manufacturing dye
- Range: 2-20ppm
- Quantity: 10 tubes per box
- 105SD DIISOPROPYL AMINE DIISOPROPYL AMINE (1-16ppm)
- Applications: Dyestuffs; surfactant; herbicide
- Range:1-16ppm
- Quantity: 10 tubes per box
- 105SD DIPROPYL AMINE DIPROPYL AMINE (1-14ppm)
- Applications:Synthesis intermediate
- Range:1-14ppm
- Quantity: 10 tubes per box
- 105SD MORPHOLINE MORPHOLINE (2-22ppm)
- Applications: Solvent; rubber accelerator
- Range:2-22ppm
- Quantity:10 tubes per box
- 105SD N-METHYL ANILINE N-METHYL ANILINE (0.50-6ppm)
- Applications:Acid acceptor; solvent
- Range: 0.5-6ppm
- Quantity: 10 tubes per box
- 105SD N,N-DIMETHYLANILINE N,N-DIMETHYLANILINE (0.5-9ppm)
- Applications:Manufacturing Vanillin; dye
- Range:0.5-9ppm
- Quantity: 10 tubes per box
- 105SD O-TOLUIDINE O-TOLUIDINE (2-22ppm)
- Applications:Dye; printing
- Range: 2-22ppm
- Quantity:10 tubes per box
- 105SD P-TOLUIDINE P-TOLUIDINE (2-20ppm)
- Applications: Analytical reagent; dye
- Range: 2-20ppm
- Quantity: 10 tubes per box
- 105SD PENTYL AMINE PENTYL AMINE (2-22ppm)
- Applications: Dye; insecticide; synthetic detergent; corrosion inhibitor; medicine; petrol additive
- Range: 2-22ppm
- Quantity: 10 tubes per box
- 105SD PROPYL AMINE PROPYL AMINE (1-20ppm)
- Applications: Analgesic
- Range:1-20ppm
- Quantity:10 tubes per box
- 105SD PYRIDINE PYRIDINE (0.5-10ppm)
- Applications:Alcohol denaturant; solvent; paint; medical care; dye of fiber
- Range:0.5-10ppm
- Quantity: 10 tubes per box
- 105SE AMMONIA AMMONIA (1-200ppm)
- Applications: Synthetic ammonia plant; leakage detection of refrigerant in ice plant; industrial hygiene
- Range: 1-200ppm
- Quantity: 10 tubes per box
- 105SE TRIMETHYL AMINE TRIMETHYL AMINE (0.5-100ppm)
- Applications: Safety; industrial hygiene
- Range: 0.5-100ppm
- Quantity: 10 tubes per box
- 105SH AMMONIA (0.5-30%)
- Applications: Process control and leakage detection in synthetic ammonia plant; cuprammonium rayon process; fertilizer manufacturing
- Range: 0.5-30%
- Quantity: 10 tubes per box
- 105SM AMMONIA (0.1-1.0%)
- Applications: Process control
- Range: 0.1-1.0%
- Quantity: 10 tubes per box
- 106B CARBON MONOXIDE-IN PRESENCE OF ETHYLENE, COLOUR INTENSITY (10-1000ppm)
- Applications: Prediction of underground spontaneous combustion of coal
- Range: 10-1000ppm
- Quantity: 10 tubes per box
- 106C CARBON MONOXIDE-IN PRESENCE OF ETHYLENE AND NITROGEN OXIDES, COLOUR INTENSITY (10-1000ppm)
- Applications: Gas manufacture; blast furnace; garage; car park tunnel; atmospheric pollution survey; prediction of underground spontaneous combustion of coal; leakage detection of coal gas; combustible gas analysis; organic syntheses
- Range: 10-1000ppm
- Quantity: 10 tubes per box
- 106S CARBON MONOXIDE (10-250ppm)
- Applications: Gas manufacture; blast furnace; garage; car park tunnel; atmospheric pollution survey; combustion of coal gas
- Range: 10-250ppm
- Quantity: 10 tubes per box
- 106SA CARBON MONOXIDE (5-2000ppm)
- Applications: Gas manufacture; blast furnace; garage; car park tunnel; atmospheric pollution survey; prediction of underground spontaneous combustion of coal; leakage detection of coal gas; combustible gas analysis; organic syntheses
- Range: 5-2000ppm
- Quantity: 10 tubes per box
- 106SC CARBON MONOXIDE (1-50ppm)
- Applications:Gas manufacture; blast furnace; garage; car park tunnel; atmospheric pollution survey; prediction of underground spontaneous combustion of coal; leakage detection of coal gas; combustible gas analysis; organic syntheses
- Range:1-50ppm
- Quantity: 10 tubes per box
- 106SH CARBON MONOXIDE (0.1-2.0%)
- Applications: Gas manufacture; blast furnace; garage; car park tunnel; atmospheric pollution survey; prediction of underground spontaneous combustion of coal; leakage detection of coal gas; combustible gas analysis; organic syntheses
- Range: 0.1-2.0%
- Quantity: 10 tubes per box
- 106SS CARBON MONOXIDE (30-500ppm)
- Applications: Gas manufacture; blast furnace; garage; car park tunnel; atmospheric pollution survey; prediction of underground spontaneous combustion of coal; leakage detection of coal gas; combustible gas analysis; organic syntheses
- Range: 30-500ppm
- Quantity: 10 tubes per box
- 106UH CARBON MONOXIDE-ULTRA HIGH RANGE (0.1-20%)
- Applications: Insect control
- Range: 0.1-20%
- Quantity: 10 tubes per box
- 107SA ETHYL ETHER (0.04-1.4%)
- Applications: Fire hazard detection in solvent extraction process; hospital laboratory; organic syntheses; clinical laboratories; explosive manufacturing
- Range: 0.04-1.4%
- Quantity: 10 tubes per box
- 107U ETHYL ETHER (20-400ppm)
- Applications: Fire hazard detection in solvent extraction process; hospital laboratory; organic syntheses; clinical laboratories; explosive manufacturing
- Range: 20-400ppm
- Quantity: 10 tubes per box
- 108B ETHYLENE-COLOUR INTENSITY (0.1-100ppm)
- Applications: Coal mining safety; concentration control in ripening fruits; organics manufacturing; plastics
- Range: 0.1-100ppm
- Quantity: 10 tubes per box
- 108SA ETHYLENE (20-1200ppm)
- Applications: Coal mining safety; concentration control in ripening fruits; organics; manufacturing; plastics
- Range: 20-1200ppm
- Quantity: 10 tubes per box
- 108SC ETHYLENE (1-200ppm)
- Applications: Used for fruit ripening control
- Range:1-200ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 109SA CHLORINE (1-40ppm)
- Applications: Leakage detection in electrolytic soda plant; leakage detection and concentration control in synthetic rubber and plastics industry; refinery of titanium and aluminum; chlorinated hydrocarbons; synthetic chemistry; industrial hygiene
- Range: 1-40ppm
- Quantity: 10 tubes per box
- 109SB CHLORINE (0.1-10.0ppm)
- Applications: Leakage detection in electrolytic soda plant; leakage detection and concentration control in synthetic rubber and plastics industry; refinery of titanium and aluminum; chlorinated hydrocarbons; synthetic chemistry; industrial hygiene
- Range: 0.1-10.0ppm
- Quantity: 10 tubes per box
- 109U CHLORINE (0.05-2ppm)
- Applications: Leakage detection in electrolytic soda plant; leakage detection and concentration control in synthetic rubber and plastics industry; refinery of titanium and aluminum; chlorinated hydrocarbons; synthetic chemistry; industrial hygiene
- Range: 0.05-2ppm
- Quantity: 10 tubes per box
- 110S GASOLINE (0.05-0.6%)
- Applications:Process control; industrial hygiene
- Range: 0.05-0.6%
- Quantity: 10 tubes per box
- 111SA ETHYL ACETATE ETHYL ACETATE (0.1-5.0%)
- Applications: Fire hazard detection in paints industry and painting; manufacturing artificial leather, artificial silk, perfumes and flavours; photographic films and plates
- Range: 0.1-5.0%
- Quantity: 10 tubes per box
- 111SA METHYL ACETATE METHYL ACETATE (0.1-3.0%)
- Applications: Fire hazard detection in paints industry and painting, manufacturing, artificial leather, artificial silk, perfumes and flavours, photographic films and plates
- Range: 0.1-3.0%
- Quantity: 10 tubes per box
- 111U 1,2,4-TRIMETHYL BENZENE 1,2,4-TRIMETHYL BENZENE (20-250ppm)
- Applications: Safety; industrial hygiene
- Range: 20-250ppm
- Quantity: 10 tubes per box
- 111U BUTYL ETHER BUTYL ETHER (10-1200ppm)
- Applications: Organic solvent treating; industrial hygiene
- Range: 10-1200ppm
- Quantity: 10 tubes per box
- 111U BUTYL METHACRYLATE BUTYL METHACRYLATE (20-1000ppm)
- Applications: Organic synthesis intermediate; manufacturing synthetic resin, lubricant additive, rust-proof for metal, paper coating agent
- Range: 20-1000ppm
- Quantity: 10 tubes per box
- 111U CUMENE CUMENE (20-140ppm)
- Applications: Organic synthesis intermediate; fuel
- Range: 20-140ppm
- Quantity: 10 tubes per box
- 111U CYCLOHEXENE CYCLOHEXENE (20-300ppm)
- Applications: Medicament; synthetic intermediate
- Range: 20-300ppm:
- Quantity: 10 tubes per box
- 111U DECAHYDRONAPHTHALENE DECAHYDRONAPHTHALENE (20-200ppm)
- Applications: Solvent; adstergent; wax for floor
- Range: 20-200ppm
- Quantity: 10 tubes per box
- 111U DIETHYLBENZENE DIETHYLBENZENE (10-180ppm)
- Applications: Organic synthesis intermediate; solvent; abstergent
- Range: 10-180ppm
- Quantity: 10 tubes per box
- 111U ETHYL ACETATE ETHYL ACETATE (10-1000ppm)
- Applications: Fire hazard detection in paint industry and painting
- Range: 10-1000ppm
- Quantity: 10 tubes per box
- 111U ETHYL METHACRYLATE ETHYL METHACRYLATE (20-500ppm)
- Applications: Organic synthesis intermediate; manufacturing synthetic resin, lubricant additive, rust-proofing for metal, paper coating agent
- Range: 20-500ppm
- Quantity: 10 tubes per box
- 111U ISOPROPYL ACETATE ISOPROPYL ACETATE (10-1000ppm)
- Applications: Fire hazard detection in paints industry and painting
- Range: 10-1000ppm
- Quantity: 10 tubes per box
- 111U ISOPROPYL ETHER ISOPROPYL ETHER (30-800ppm)
- Applications: Gunpowder; blast; dyestuff; solvent; abstergent; manufacturing; rubber; cement; lens
- Range: 30-800ppm
- Quantity: 10 tubes per box
- 111U N-DECANE N-DECANE (5-90ppm)
- Applications: Organic synthesis intermediate; solvent; abstergent
- Range: 5-90ppm
- Quantity: 10 tubes per box
- 111U N-NONANE N-NONANE (5-160ppm)
- Applications: Safety; industrial hygiene
- Range: 5-160ppm
- Quantity: 10 tubes per box
- 111U N-UNDECANE N-UNDECANE (10-140ppm)
- Applications: Safety; industrial hygiene
- Range: 10-140ppm
- Quantity: 10 tubes per box
- 111U TERT-BUTANOL TERT-BUTANOL (20-500ppm)
- Applications: Organic solvent treating; industrial hygiene
- Range: 20-500ppm
- Quantity: 10 tubes per box
- 111U TERT-BUTYL METHYL ETHER (MTBE) TERT-BUTYL METHYL ETHER (MTBE) (25-500ppm)
- Applications: Fuel; powder; blast cell etc; antiknock; solvent; abstergent
- Range: 25-500ppm
- Quantity: 10 tubes per box
- 112SA HYDROGEN CYANIDE (0.01-3.00%)
- Applications: Concentration control in fumigation process
- Range: 0.01-3.00%
- Quantity: 10 tubes per box
- 112SB HYDROGEN CYANIDE (0.5-100ppm)
- Applications: Electro-plating; metal hardening; fumigation process; industrial hygiene
- Range: 0.5-100ppm
- Quantity: 10 tubes per box
- 112SC HYDROGEN CYANIDE (0.3-8ppm)
- Applications: Electro-plating; metal hardening; fumigation process; industrial hygiene
- Range: 0.3-8ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 113SA N-HEXANE (0.05-1.32%)
- Applications: Solvent recovery control and fire hazard detection in extraction of oils and fats; paints industry and painting
- Range: 0.05-1.32%
- Quantity: 10 tubes per box
- 113SB 2,2,4-TRIMETHYL PENTANE 2,2,4-TRIMETHYL PENTANE (100-4000ppm)
- Applications: Automotive fuel
- Range: 100-4000ppm
- Quantity: 10 tubes per box
- 113SB HEPTANE HEPTANE (100-2000ppm)
- Applications: Industrial hygiene
- Range: 100-2000ppm
- Quantity: 10 tubes per box
- 113SB ISOBUTANE ISOBUTANE (50-1200ppm)
- Applications: Industrial hygiene
- Range: 50-1200ppm
- Quantity: 10 tubes per box
- 113SB ISOBUTYLENE ISOBUTYLENE (0.03-2.0%)
- Applications: Manufacturing Butyl-rubber
- Range: 0.03-2.0%
- Quantity: 10 tubes per box
- 113SB METHYL CYCLOHEXANE METHYL CYCLOHEXANE (100-1600ppm)
- Applications: Cellulose solvent
- Range: 100-1600ppm
- Quantity: 10 tubes per box
- 113SB N-HEXANE N-HEXANE (50-1400ppm)
- Applications: Solvent recovery control and fire hazard detection in extraction of oils and fats; paints industry and painting
- Range: 50-1400ppm
- Quantity: 10 tubes per box
- 113SB PENTANE PENTANE (50-1000ppm)
- Applications: Industrial hygiene
- Range: 50-1000ppm
- Quantity: 10 tubes per box
- 113SC N-HEXANE (5-800ppm)
- Applications: Solvent recovery control and fire hazard detection in extraction of oils and fats; paints industry and painting
- Range: 5-800ppm
- Quantity: 10 tubes per box
- 114 BROMINE (1-20ppm)
- Applications: Industrial hygiene
- Range: 1-20ppm
- Quantity: 10 tubes per box
- 115S CYCLOHEXANE (0.01-0.60%)
- Applications: Fire hazard detection in paints industry and painting, extraction process of oils, fats and waxes
- Range: 0.01-0.6%
- Quantity: 10 tubes per box
- 116 CHLORINE DIOXIDE (1-20ppm)
- Applications:Leakage detection in textile and paper bleaching plant; water treatment
- Range:1-20ppm
- Quantity:10 tubes per box
- 117SA NITROGEN DIOXIDE (20-1000ppm)
- Applications:Arc welding; acid dipping; garage (diesel exhaust); waste gas analysis in sulphuric and nitric acid; dipping of metal products
- Range:20-1000ppm
- Quantity:10 tubes per box
- 117SB NITROGEN DIOXIDE (0.5-30.0ppm)
- Applications: Arc welding; acid dipping; garage (diesel exhaust); waste gas analysis in sulphuric and nitric acid; dipping of metal products
- Range:0.5-30.0ppm
- Quantity: 10 tubes per box
- 117SD NITROGEN DIOXIDE (0.1-1.0ppm)
- Applications:Arc welding; acid dipping; garage (diesel exhaust); waste gas analysis in sulphuric and nitric acid; dipping of metal products
- Range: 0.1-1.0ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 118SB BENZENE-IN PRESENCE OF GASOLINE AND/OR OTHER AROMATIC HYDROCARBONS (5-300ppm)
- Applications: Industrial hygiene (suspected carcinogen in humans)
- Range: 5-300ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 118SC BENZENE (1-100ppm)
- Applications: Industrial hygiene (suspected carcinogen in humans)
- Range:1-100ppm
- Quantity: 10 tubes per box
- 118SD BENZENE (0.1-75ppm)
- Applications: Industrial hygiene (suspected carcinogen in humans)
- Range: 0.1-75ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 118SE BENZENE-IN PRESENCE OF GASOLINE AND/OR OTHER AROMATIC HYDROCARBONS (0.2-80ppm)
- Applications: Industrial hygiene (suspected carcinogen in humans)
- Range:0.2-80ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 119LPG METHANOL IN LPG (100-1000ppmv)
- Applications: For use of anti-freezing agent in LP gas
- Range:100-1000ppmv
- Quantity:10 tubes per box
- 119SA METHYL ALCOHOL (0.05-6.0%)
- Applications: Fire hazard detection in hospital and laboratory; pharmaceutical industry; paints industry and painting; manufacturing printing inks, denatured-alcohol, antifreezes, perfumes and cosmetics; industrial hygiene
- Range: 0.05-6.0%
- Quantity: 10 tubes per box
- 119U 1,4-DIOXANE 1,4-DIOXANE (20-500ppm)
- Applications: Fire hazard detection in paints industry and painting industry; industrial hygiene
- Range: 20-500ppm
- Quantity: 10 tubes per box
- 119U METHYL ALCOHOL METHYL ALCOHOL (20-1000ppm)
- Applications: Fire hazard detection in hospital and laboratory; pharmaceutical industry; paints industry and painting; manufacturing printing inks, denatured-alcohol, antifreezes, perfumes and cosmetics; industrial hygiene
- Range: 20-1000ppm
- Quantity: 10 tubes per box
- 120SB HYDROGEN SULPHIDE (0.75-300ppm)
- Applications: Manufacturing viscose rayon; oil refinery; metal refinery; gas manufacture; chemical laboratory; process control
- Range: 0.75-300ppm
- Quantity: 10 tubes per box
- 120SC HYDROGEN SULPHIDE (50-1600ppm)
- Applications: Process control in sulphur recovery plant in petroleum refinery
- Range: 50-1600ppm
- Quantity: 10 tubes per box
- 120SD HYDROGEN SULPHIDE (1-60ppm)
- Applications: Process control in sulphur recovery plant in petroleum refinery
- Range:1-60ppm
- Quantity: 10 tubes per box
- 120SE HYDROGEN SULPHIDE (0.5-40ppm)
- Applications: Process control in sulphur recovery plant in petroleum refinery
- Range: 0.5-40ppm
- Quantity: 10 tubes per box
- 120SF HYDROGEN SULPHIDE (25-2000ppm)
- Applications: Impurity test of industrial raw gases; chemicals manufacturing; metallurgy
- Range:25-2000ppm
- Quantity: 10 tubes per box
- 120SH HYDROGEN SULPHIDE (0.1-4.0%)
- Applications: Process control in sulphur recovery plant in petroleum refinery
- Range: 0.1-4.0%
- Quantity: 10 tubes per box
- 120SM HYDROGEN SULPHIDE (0.05-1.20%)
- Applications:Process control in sulphur recovery plant in petroleum refinery
- Range: 0.05-1.20%
- Quantity: 10 tubes per box
- 120U HYDROGEN SULPHIDE (0.2-6.0ppm)
- Applications: Industrial hygiene
- Range: 0.2-6.0ppm
- Quantity: 10 tubes per box
Documents
- 120UH HYDROGEN SULPHIDE-ULTRA HIGH RANGE (2-20%)
- Applications: Oil field (esp. oil well)
- Range: 2-20%
- Quantity: 10 tubes per box
- 120UT HYDROGEN SULPHIDE-ULTRA HIGH RANGE (2.5-40%)
- Applications: Oil field (esp. oil well)
- Range: 2.5-40%
- Quantity: 5 tubes per box
- 121SA PHOSPHINE IN ACETYLENE (20-800ppm)
- Applications: Impurity test of calcium carbide and acetylene
- Range: 20-800ppm
- Quantity: 10 tubes per box
- 121SB PHOSPHINE IN ACETYLENE (5-90ppm)
- Applications: Impurity test of calcium carbide and acetylene
- Range: 5-90ppm
- Quantity: 10 tubes per box
- 121SD PHOSPHINE (0.25-20.0ppm)
- Applications: Concentration control in fumigation of tobacco leaves and cereals; doping gas analysis; in manufacturing semiconductor; industrial hygiene
- Range: 0.25-20.0ppm
- Quantity: 10 tubes per box
- 121SE PHOSPHINE (10-1400ppm)
- Applications: Concentration control in fumigation of tobacco leaves and cereals; doping gas analysis; in manufacturing semiconductor; industrial hygiene
- Range: 10-1400ppm
- Quantity: 10 tubes per box
- 121SG PHOSPHINE (5-150ppm)
- Applications: Concentration control in fumigation of tobacco leaves and cereals; doping gas analysis; in manufacturing semiconductor; industrial hygiene
- Range: 5-150ppm
- Quantity: 10 tubes per box
- 121SH PHOSPHINE (100-3200ppm)
- Applications: Concentration control in fumigation of tobacco leaves and cereals; doping gas analysis; in manufacturing semiconductor; industrial hygiene
- Range: 100-3200ppm
- Quantity: 10 tubes per box
- 121SS PHOSPHINE (200-6000ppm)
- Applications: Fumigation of grains
- Range: 200-6000ppm
- Quantity: 10 tubes per box
- 121U ARSINE ARSINE (0.05-2.0ppm)
- Applications: Industrial hygiene; semiconductor manufacturing process
- Range: 0.05-2.0ppm
- Quantity: 10 tubes per box
- 121U PHOSPHINE PHOSPHINE (0.05-2.0ppm)
- Applications: Industrial hygiene; semiconductor manufacturing process
- Range: 0.05-2.0ppm
- Quantity: 10 tubes per box
- 122SA ETHYLENE OXIDE ETHYLENE OXIDE (0.01-4.0%)
- Applications:Concentration control in fumigation of foodstuffs and textiles; fire hazard detection in ethylene glycol plant; sterilization
- Range: 0.01-4.0%
- Quantity: 10 tubes per box
- 122SA FURAN FURAN (0.01-2.0%)
- Applications: Fire hazard detection in paints industry and painting
- Range: 0.01-2.0%
- Quantity: 10 tubes per box
- 122SA ISOPROPYL ALCOHOL ISOPROPYL ALCOHOL (0.05-2.5%)
- Applications: Fire hazard detection in paints industry and painting; manufacturing pharmaceuticals, cosmetics, perfumes, inks, leather dyes, antifreezes, hydraulic brake fluids; metal decreasing and drying: hospitals and laboratories
- Range: 0.05-2.5%
- Quantity: 10 tubes per box
- 122SA METHYL ETHYL KETONE METHYL ETHYL KETONE (0.05-5.0%)
- Applications: Process control; synthetic resins; solvent; solvent recovery control and fire hazard detection in paint industry and extraction of oils, fats, natural resins, waxes; cleaning and decreasing of metal surface; denaturization of alcohol
- Range: 0.05-5.0%
- Quantity: 10 tubes per box
- 122SA METHYL ISOBUTYL KETONE METHYL ISOBUTYL KETONE (0.01-0.6%)
- Applications: Solvent for gums, resins, nitrocellulose
- Range: 0.01-0.6%
- Quantity: 10 tubes per box
- 122SC ETHYLENE OXIDE ETHYLENE OXIDE (1-15ppm)
- Applications: Concentration control in fumigation and textiles
- Range: 1-15ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 122SC PROPYLENE GLYCOL PROPYLENE GLYCOL (5-50ppm)
- Applications: Manufacturing moisturizer, lubricant, emulsify, anti-freeze
- Range: 5-50ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 122SC PROPYLENE OXIDE PROPYLENE OXIDE (3-70ppm)
- Applications: Leakage detection in preparation of propylene oxide
- Range: 3-70ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 122SD ETHYLENE OXIDE (0.1-14.0ppm)
- Applications: Atmospheric pollution surveys in hospitals
- Range: 0.1-14.0ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 122SL ETHYLENE OXIDE (50-2600ppm)
- Applications: Concentration control in fumigation of foodstuffs and textiles; fire hazard detection in ethylene glycol; plant sterilization
- Range: 50-2600ppm
- Quantity: 10 tubes per box
- 122SM ETHYLENE OXIDE (5-100ppm)
- Applications: Concentration control in fumigation of foodstuffs and textiles; fire hazard detection in ethylene glycol plant; sterilization
- Range: 5-100ppm
- Quantity: 10 tubes per box
- 123S DIMETHYL ETHER (0.01-1.20%)
- Applications: Impurity test of Methyl chloride; process control; refrigeration
- Range: 0.01-1.20%
- Quantity: 10 tubes per box
- 124SA TOLUENE (10-500ppm)
- Applications: Solvent recovery control and fire hazard detection in paints industry and painting; rubber and plastics industry; manufacturing dyes, printing inks, adhesives; industrial hygiene
- Range: 10-500ppm
- Quantity: 10 tubes per box
- 124SB TOLUENE (2-100ppm)
- Applications: Solvent recovery control
- Range: 2-100ppm
- Quantity: 10 tubes per box
- 124SH TOLUENE (100-3000ppm)
- Applications: Solvent recovery control
- Range: 100-3000ppm
- Quantity: 10 tubes per box
- 125SA PROPANE (0.02-0.50%)
- Applications: Manufacturing city gas; fire hazard detection
- Range: 0.02-0.50%
- Quantity: 10 tubes per box
- 126B CARBON DIOXIDE (0.01-0.70%)
- Applications: Industrial hygiene
- Range: 0.01-0.70%
- Quantity: 10 tubes per box
- 126SA CARBON DIOXIDE (0.1-5.2%)
- Applications: Air contamination test in buildings, closed vessels, tunnels, other confined spaces; CO2 concentration control in greenhouses, poultry farm, fruit storage
- Range: 0.1-5.2%
- Quantity: 10 tubes per box
- 126SB CARBON DIOXIDE (0.021-1.0%)
- Applications: Industrial hygiene
- Range: 0.021-1.0%
- Quantity: 10 tubes per box
- 126SF CARBON DIOXIDE (100-4000ppm)
- Applications: Industrial hygiene
- Range: 100-4000ppm
- Quantity: 10 tubes per box
- 126SG CARBON DIOXIDE (0.02-1.40%)
- Applications: Industrial hygiene
- Range: 0.02-1.40%
- Quantity: 10 tubes per box
- 126SH CARBON DIOXIDE-EXTRA HIGH RANGE (1-20%)
- Applications: Combustion gas analysis
- Range: 1-20%
- Quantity: 10 tubes per box
- 126UH CARBON DIOXIDE-ULTRA HIGH RANGE (5-50%)
- Applications: Industrial hygiene
- Range: 5-50%
- Quantity: 10 tubes per box
- 128SA ACRYLONITRILE (0.1-3.5%)
- Applications: Leakage and fire hazard detection in synthetic rubber and plastics industry
- Range: 0.1-3.5%
- Quantity: 10 tubes per box
- 128SB ACRYLONITRILE (10-500ppm)
- Applications: Leakage detection
- Range: 10-500ppm
- Quantity: 10 tubes per box
- 128SC ACRYLONITRILE (1-120ppm)
- Applications: Industrial hygiene; human carcinogen: recognized to have carcinogenic potential
- Range: 1-120ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 128SD ACRYLONITRILE (0.2-20ppm)
- Applications: Industrial hygiene; human carcinogen: recognized to have carcinogenic potential
- Range: 0.2-20ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 129 NICKEL CARBONYL (20-700ppm)
- Applications: Waste gas analysis
- Range: 20-700ppm
- Quantity: 10 tubes per box
- 130U ETHYL MERCAPTAN ETHYL MERCAPTAN (0.5-10ppm)
- Applications: Industrial hygiene
- Range: 0.5-10ppm
- Quantity: 10 tubes per box
- 130U ISOPROPYL MERCAPTAN ISOPROPYL MERCAPTAN (0.5-10ppm)
- Applications: Safety; industrial hygiene
- Range: 0.5-10ppm
- Quantity: 10 tubes per box
- 130U METHYL MERCAPTAN METHYL MERCAPTAN (0.5-10ppm)
- Applications: Pesticides; fungicides; plastics; atmospheric pollution survey; concentration control of odorant
- Range: 0.5-10ppm
- Quantity: 10 tubes per box
- 130U N-PROPYL MERCAPTAN N-PROPYL MERCAPTAN (0.5-10ppm)
- Applications: Industrial hygiene
- Range: 0.5-10ppm
- Quantity: 10 tubes per box
- 130U TERT-BUTYL MERCAPTAN TERT-BUTYL MERCAPTAN (0.5-10ppm)
- Applications: Industrial hygiene
- Range: 0.5-10ppm
- Quantity: 10 tubes per box
- 131 INORGANIC GAS - QUALITATIVE
- Applications: Qualitative analysis, emergency and disaster scenes.
- Quantity: 10 tubes per box
- Note: This qualitative detector tube enables detection of a range of inorganic gases as it contains different reagents at mutiple sections within the tube. The main purpose for this tube is qualitative analysis but simple quantitative analysis of the gases is also possible. This tube is of benefit where the user needs to establish firstly if there is gas within an environment and secondly, which type of gas. Therefore tube 131 is regularly used at emergency scenes.
- 132SA VINYL CHLORIDE (0.05-1.0%)
- Applications: Leakage and fire hazard detection in PVC plant; industrial hygiene
- Range: 0.05-1.0%
- Quantity: 10 tubes per box
- 132SB VINYL CHLORIDE (5-500ppm)
- Applications: Process control; leakage detection and fire hazard detection in synthetic rubber and plastics industry
- Range: 5-500ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 132SC VINYL CHLORIDE (0.1-12ppm)
- Applications: Industrial hygiene
- Range: 0.1-12ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 133A ACETALDEHYDE (0.004-1.0%)
- Applications: Manufacturing of synthetic rubber, plastics, various organics, perfume, flavours and fragrances
- Range: 0.004-1.0%
- Quantity: 10 tubes per box
- 133SB ACETALDEHYDE (5-140ppm)
- Applications: Manufacturing of synthetic rubber, plastics, various organics
- Range: 5-140ppm
- Quantity: 10 tubes per box
- 133SC ACETALDEHYDE (1-30ppm)
- Applications: Manufacturing of synthetic rubber, plastics, various organics
- Range: 1-30ppm
- Quantity: 10 tubes per box
- 134SA TRICHLOROETHYLENE (5-300ppm)
- Applications: Metal decreasing and cleaning; dry cleaning and insect fumigation of clothes; manufacturing printing inks; industrial hygiene
- Range: 5-300ppm
- Quantity: 10 tubes per box
- 134SB TRICHLOROETHYLENE (0.2-36.8ppm)
- Applications: Metal decreasing and cleaning; dry cleaning and insect fumigation of clothes; manufacturing printing inks; industrial hygiene
- Range: 0.2-36.8ppm
- Quantity: 10 tubes per box
- 134SG TRICHLOROETHYLENE (0.05-2.0%)
- Applications: Metal decreasing and cleaning; dry cleaning and insect fumigation of clothes; manufacturing printing inks; industrial hygiene
- Range: 0.05-2.0%
- Quantity: 10 tubes per box
- 135SA TETRACHLOROETHYLENE (5-300ppm)
- Applications: Dry cleaning; metal decreasing; paints industry and painting; solvent recovery control
- Range: 5-300ppm
- Quantity: 10 tubes per box
- 135SB TETRACHLOROETHYLENE (0.2-10ppm)
- Applications: Dry cleaning; metal decreasing; paints industry and painting; solvent recovery control
- Range: 0.2-10ppm
- Quantity: 10 tubes per box
- 135SG TETRACHLOROETHYLENE (0.1-2.0%)
- Applications: Dry cleaning; metal decreasing; paints industry and painting; solvent recovery control
- Range: 0.1-2.0%
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 135SM TETRACHLOROETHYLENE (50-1250ppm)
- Applications: Process control in dry cleaning industry
- Range: 50-1250ppm
- Quantity: 10 tubes per box
- 136 ACROLEIN (0.005-1.8%)
- Applications: Leakage and fire hazard detection in plastics industry
- Range: 0.005-1.8%
- Quantity: 10 tubes per box
- 137U HYDROGEN (0.05-0.8%)
- Applications: Industrial hygiene
- Range: 0.05-0.8%
- Quantity: 5 tubes per box
- 138U BUTYL ACETATE (10-400ppm)
- Applications: Industrial hygiene
- Range: 10-400ppm
- Quantity: 10 tubes per box
- 139SB 1,4-DIOXANE 1,4-DIOXANE (0.05-2.5%)
- Applications: Fire hazard detection in paints industry and painting industry; industrial hygiene
- Range: 0.05-2.5%
- Quantity: 10 tubes per box
- 139SB BUTYL ACETATE BUTYL ACETATE (0.01-1.0%)
- Applications: Leakage and fire hazard detection in paints industry and painting; printing inks; artificial leather; synthetics; dyes; drugs and perfumes
- Range: 0.01-1.0%
- Quantity: 10 tubes per box
- 139SB ISOBUTYL ACETATE ISOBUTYL ACETATE (0.01-1.4%)
- Applications: Fire hazard detection in paints industry and painting; manufacturing artificial leather; textile sizing compounds; printing inks
- Range: 0.01-1.4%
- Quantity: 10 tubes per box
- 139SB ISOPROPYL ACETATE ISOPROPYL ACETATE (0.01-1.2%)
- Applications: Fire hazard detection in paints industry and painting; manufacturing artificial leather, plastic films, adhesives; recovery of acetic acid; industrial hygiene
- Range: 0.01-1.2%
- Quantity: 10 tubes per box
- 139SB METHYL ETHYL KETONE METHYL ETHYL KETONE (0.01-1.4%)
- Applications: Process control; synthetic resins; solvent; solvent recovery control and fire hazard detection in paint industry and extraction of oils, fats, natural resins waxes; cleaning and decreasing of metal surface; denaturization of alcohol
- Range: 0.01-1.4%
- Quantity: 10 tubes per box
- 139SB PROPYL ACETATE PROPYL ACETATE (0.01-1.4%)
- Applications: Fire hazard detection in paints industry and painting; manufacturing flavours and perfumes
- Range: 0.01-1.4%
- Quantity: 10 tubes per box
- 139U DIISOBUTYL KETONE DIISOBUTYL KETONE (20-1000ppm)
- Applications: Safety; industrial hygiene
- Range: 20-1000ppm
- Quantity: 10 tubes per box
- 139U METHYL AMYL KETONE METHYL AMYL KETONE (23-350ppm)
- Applications: Process control; fire hazard detection in paints industry especially industrial hygiene
- Range: 25-350ppm
- Quantity: 10 tubes per box
- 139U METHYL ETHYL KETONE METHYL ETHYL KETONE (20-1500ppm)
- Applications: Process control; fire hazard detection in paints industry especially industrial hygiene
- Range: 20-1500ppm
- Quantity: 10 tubes per box
- 139U METHYL PROPYL KETONE METHYL PROPYL KETONE (20-1500ppm)
- Applications: Industrial hygiene
- Range: 20-1500ppm
- Quantity: 10 tubes per box
- 140SA ARSINE (5-160ppm)
- Applications: Doping gas analysis in semiconductor industry; waste gas analysis in metal refinery
- Range: 5-160ppm
- Quantity: 10 tubes per box
- 141SA CARBON DISULPHIDE (30-500ppm)
- Applications: Recovery control in viscose rayon and cellophane plant; manufacturing viscose rayon and cellophane
- Range: 30-500ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 141SB CARBON DISULPHIDE (0.8-50ppm)
- Applications: Industrial hygiene
- Range: 0.8-50ppm
- Quantity: 2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 141SC CARBON DISULPHIDE (0.1-6.4ppm)
- Applications: Safety; industrial hygiene
- Range: 0.1-6.4ppm
- Quantity: 2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 142S MERCURY VAPOUR (0.1-10.0mg/m3)
- Applications: Electrolytic soda industry; manufacturing thermometers, fluorescent lamps
- Range: 0.1-10.0mg/m3
- Quantity: 10 tubes per box
- 143SA XYLENE (5-1000ppm)
- Applications: Leakage and fire hazard detection in phthalic acid plant; paints industry and painting; manufacturing dyes, adhesives, printing inks, cleaning fluids; industrial hygiene
- Range: 5-1000ppm
- Quantity: 10 tubes per box
- 143SB XYLENE (5-200ppm)
- Applications: Leakage and fire hazard detection in phthalic acid plant; paints industry and painting; manufacturing dyes, adhesives, printing inks, cleaning fluids; industrial hygiene
- Range: 5-200ppm
- Quantity: 10 tubes per box
- 145SA 1,2-DICHLOROETHYLENE (4.2-840ppm)
- Applications: Extraction of natural dyes; manufacturing perfumes; paints industry and painting; ferment retardation; industrial hygiene
- Range: 4.2-840ppm
- Quantity: 10 tubes per box
- 146S PHOSGENE (0.1-20ppm)
- Applications: Leakage detection in manufacturing dyes, chemicals; industrial hygiene
- Range: 0.1-20ppm
- Quantity: 10 tubes per box
- 147S CARBON TETRACHLORIDE (5-60ppm)
- Applications: Paint manufacture; fire extinguisher waxes, polishes
- Range: 5-60ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 150U ISOPROPYL ALCOHOL (20-1200ppm)
- Applications: Industrial hygiene
- Range: 20-1200ppm
- Quantity: 10 tubes per box
- 151U PROPYL ACETATE (20-1000ppm)
- Applications: Paints industry and painting; manufacturing flavours and perfumes; industrial hygiene
- Range: 20-1000ppm
- Quantity: 10 tubes per box
- 152S CHLOROFORM (23-500ppm)
- Applications: Industrial hygiene (suspected carcinogen in humans)
- Range: 23-500ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 153U ISOBUTYL ACETATE ISOBUTYL ACETATE (10-400ppm)
- Applications: Industrial hygiene
- Range: 10-400ppm
- Quantity: 10 tubes per box
- 153U NAPHTHALENE NAPHTHALENE (10-100ppm)
- Applications: Industrial hygiene
- Range: 10-100ppm
- Quantity: 10 tubes per box
- 155U METHYL ISOBUTYL KETONE (5-300ppm)
- Applications: Industrial hygiene
- Range: 5-300ppm
- Quantity: 10 tubes per box
- 156S HYDROGEN FLUORIDE (0.17-30ppm)
- Applications: Dehydrator; manufacturing of Hydrofluoric acid and Freon; industrial hygiene
- Range: 0.17-30ppm
- Quantity: 10 tubes per box
- 157JS METHYL BROMIDE (3-70g/m3)
- Applications: Insect fumigation for mills, warehouses, ships, vaults, freight cars; concentration control in granary fumigation
- Range: 3-70g/m3)
- Quantity: 2x10 tubes
- 157SA METHYL BROMIDE (10-500ppm)
- Applications: Insect fumigation for mills, warehouses, ships, vaults, freight cars; concentration control in granary fumigation
- Range: 10-500ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SB 1-BROMOPROPANE 1-BROMOPROPANE (5-80ppm)
- Applications: Safety; industrial hygiene
- Range: 5-80ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SB 1,2-DICHLOROPROPANE 1,2-DICHLOROPROPANE (20-250ppm)
- Applications: Safety; industrial hygiene
- Range: 20-250ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SB 2-BROMOPROPANE 2-BROMOPROPANE (5-80ppm)
- Applications: Safety; industrial hygiene
- Range: 5-80ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SB BROMOCHLOROMETHANE BROMOCHLOROMETHANE (2-400ppm)
- Applications: Safety; industrial hygiene
- Range: 2-400ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SB BROMOFORM BROMOFORM (0.5-20ppm)
- Applications: Safety; industrial hygiene
- Range: 0.5-20ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SB DIBROMOMETHANE DIBROMOMETHANE (2.5-40ppm)
- Applications: Safety; industrial hygiene
- Range: 2.5-40ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SB ETHYL BROMIDE ETHYL BROMIDE (2-400ppm)
- Applications: Safety; industrial hygiene
- Range: 2-400ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SB METHYL BROMIDE METHYL BROMIDE (0.4-80ppm)
- Applications: Insect fumigation for mills, warehouses, ships, vaults, freight cars; concentration control in granary fumigation
- Range: 0.4-80ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 157SD METHYL BROMIDE (0.1-22ppm)
- Applications: Insect fumigation for mills, warehouses,ships, vaults, freight cars; concentration control in granary fumigation
- Range: 0.1-20ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 158S DIVINYL BENZENE DIVINYL BENZENE (5-50ppm)
- Applications: Ion exchange, resin and membrane, synthetic rubber etc.
- Range: 5-50ppm
- Quantity: 10 tubes per box
- 158S STYRENE STYRENE (2.5-300ppm)
- Applications: Fire hazard detection in synthetic rubber, resin and plastics industry
- Range: 2.5-300ppm
- Quantity: 10 tubes per box
- 158S α-PINENE α-PINENE (20-300ppm)
- Applications: Materials for perfume and materia medica
- Range: 20-300ppm
- Quantity: 10 tubes per box
- 158SB STYRENE (1-100ppm)
- Applications: Fire hazard detection in synthetic rubber, resin and plastics industry
- Range: 1-100ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 159SA OXYGEN (2-24%)
- Applications: Oxygen deficiency in underground or closed vessels, tunnels and mines
- Range: 2-24%
- Quantity: 5 tubes per box
- 159SB OXYGEN (2-24%)
- Applications: In the area where danger of gas explosion exists
- Range: 2-24%
- Quantity: 5 tubes per box
- 159SC OXYGEN-NON-HEATING TYPE (1.5-24%)
- Applications: Oxygen deficiency in underground or closed vessels, tunnels and mines
- Range: 1.5-24%
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 160S METHYL CHLOROFORM (15-400ppm)
- Applications: Metal decreasing and cleaning; extraction of oils and fats; paints industry; industrial hygiene
- Range: 15-400ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 162U TETRAHYDROFURAN (20-400ppm)
- Applications: Safety; industrial hygiene
- Range: 20-400ppm
- Quantity: 10 tubes per box
- 163SA PROPYLENE OXIDE (0.05-5.0%)
- Applications: Leakage detection in preparation of propylene oxide
- Range: 0.05-5.0%
- Quantity: 10 tubes per box
- 163SD PROPYLENE OXIDE (0.2-5.0ppm)
- Applications: Safety; industrial hygiene
- Range: 0.2-5.0ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 164SA METHYL MERCAPTAN (5-140ppm)
- Applications: Pesticides; fungicides; plastics; atmospheric pollution survey; concentration control of odorant
- Range: 5-140ppm
- Quantity: 10 tubes per box
- 164SH METHYL MERCAPTAN (50-1000ppm)
- Applications: Pesticides; fungicides; plastics; atmospheric pollution survey; concentration control of odorant
- Range: 50-1000ppm
- Quantity: 10 tubes per box
- 165SA ETHYL MERCAPTAN (1-160ppm)
- Applications: Atmospheric pollution survey; concentration control of odorant; plastics manufacturing
- Range: 1-160ppm
- Quantity: 10 tubes per box
- 165SB ETHYL MERCAPTAN ETHYL MERCAPTAN (2.5-80ppm)
- Applications: In LPG gas
- Range: 2.5-80ppm
- Quantity: 10 tubes per box
- 165SB TERT-BUTYL MERCAPTAN TERT-BUTYL MERCAPTAN (2.5-80ppm)
- Applications: Industrial hygiene
- Range: 2.5-80ppm
- Quantity: 10 tubes per box
- 166S ETHYLENE DIBROMIDE (1-50ppm)
- Applications: Concentration control in granary fumigation process
- Range: 1-50ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 167S HYDROGEN SELENIDE (1-600ppm)
- Applications: Doping gas analysis in manufacturing semiconductors; industrial hygiene
- Range: 1-600ppm
- Quantity: 10 tubes per box
- 168SA 1,3-BUTADIENE (0.03-2.60%)
- Applications: Process control and fire hazard detection in synthetic rubber industry; manufacturing synthetic rubber
- Range: 0.03-2.60%
- Quantity: 10 tubes per box
- 168SB 1,3-BUTADIENE (30-600ppm)
- Applications: Leakage detection in synthetic rubber industry
- Range: 30-600ppm
- Quantity: 10 tubes per box
- 168SC 1,3-BUTADIENE (2.5-100ppm)
- Applications: Leakage detection in synthetic rubber industry
- Range: 2.5-100ppm
- Quantity: 10 tubes per box
- 168SE 1,3-BUTADIENE (0.1-10.0ppm)
- Applications: Leakage detection in synthetic rubber industry
- Range: 0.1-10.0ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 169S CHLOROPRENE (0.5-20ppm)
- Applications: Industrial hygiene
- Range: 0.5-20ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 171SA FORMALDEHYDE (20-1500ppm)
- Applications: Atmospheric pollution survey; germicide; fungicide; organic manufacturing; industrial hygiene
- Range: 20-1500ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 171SB FORMALDEHYDE (1-35ppm)
- Applications: Atmospheric pollution survey; germicide; fungicide; organic manufacturing; industrial hygiene
- Range: 1-35ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 171SC FORMALDEHYDE (0.05-4.0ppm)
- Applications: Atmospheric pollution survey; germicide; fungicide; organic manufacturing; industrial hygiene
- Range: 0.05-4.0ppm
- Quantity: 10 tubes per box
- 172S CHLOROPICRIN (0.05-16.0ppm)
- Applications: Industrial hygiene
- Range: 0.05-16.0ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 173SA HYDROGEN CHLORIDE (20-1200ppm)
- Applications: Industrial hygiene; process control; leakage detection; fire hazard detection; pharmaceuticals; organics manufacturing
- Range: 20-1200ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 173SB HYDROGEN CHLORIDE (0.4-40ppm)
- Applications: Industrial hygiene; process control; leakage detection; fire hazard detection; pharmaceuticals; organics manufacturing
- Range: 0.4-40ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 174A NITROGEN OXIDE AND DIOXIDE - SEPARATELY MEASURABLE (NO: 10-300ppm, NO2: 1-40)
- Applications: Exhaust gas analysis
- Range: NO: 10-300ppm; NO2: 1-40
- Quantity: 5 tubes
- 174B NITROGEN OXIDE AND DIOXIDE - SEPARATELY MEASURABLE (NO: 10-300ppm; NO2: 1-40ppm)
- Applications: Flue gas analysis (with hollow glass tubes)
- Range: NO: 10-300ppm; NO2: 1-40ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 175SA NITROGEN OXIDES (20-250ppm)
- Applications: Exhaust gas analysis
- Range: 20-250ppm
- Quantity: 10 tubes per box
- 175SH NITROGEN OXIDES (100-2500ppm)
- Applications: Exhaust gas analysis
- Range: 100-2500ppm
- Quantity: 10 tubes per box
- 175U NITROGEN OXIDES (0.5-30ppm)
- Applications: Industrial hygiene
- Range: 0.5-30ppm
- Quantity: 10 tubes per box
- 176SC METHYL IODIDE (0.4-50ppm)
- Applications: Wood fumigation
- Range: 0.4-50ppm
- Quantity: 10 tubes per box
- 176UH METHYL IODIDE (500-15000ppm)
- Applications: Wood fumigation
- Range: 500-15000ppm
- Quantity: 10 tubes per box
- 177SA WATER VAPOUR (1.7-33.8mg/L)
- Applications: Industrial hygiene; process control
- Range: 1.7-33.8mg/L
- Quantity: 10 tubes per box
- 177U WATER VAPOUR (0.05-2.0mg/L)
- Applications: Industrial hygiene; process control
- Range: 0.05-2.0mg/L
- Quantity: 10 tubes per box
- 177UL WATER VAPOUR (3-80LB/MMCF)
- Applications: Petrochemical industry; industrial hygiene
- Range: 3-80LB/MMCF
- Quantity: 10 tubes per box
- 177UR WATER VAPOUR-ULTRA LOW RANGE (2-12LB/MMCF)
- Applications: Petrochemical industry; industrial hygiene
- Range: 2-12LB/MMCF
- Quantity: 10 tubes per box
- 178SB CHLOROBENZENE (1-140ppm)
- Applications: Industrial hygiene
- Range: 1-140ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 179S ETHYL BENZENE (10-500ppm)
- Applications: Industrial hygiene
- Range: 10-500ppm
- Quantity: 10 tubes per box
- 180S DICHLOROMETHANE (10-1000ppm)
- Applications: Industrial hygiene
- Range: 10-1000ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 181S ANILINE (1-30ppm)
- Applications: Industrial hygiene
- Range: 1-30ppm
- Quantity: 10 tubes per box
- 182SA OZONE (50-1000ppm)
- Applications: Process control
- Range: 50-1000ppm
- Quantity: 10 tubes per box
- 182SB OZONE (2.5-100ppm)
- Applications: Process control
- Range: 2.5-100ppm
- Quantity: 10 tubes per box
- 182U OZONE (0.025-3.0ppm)
- Applications: Air pollution analysis; industrial hygiene
- Range: 0.025-3.0ppm
- Quantity: 10 tubes per box
- 183U CRESOL CRESOL (0.5-25.0ppm)
- Applications: Industrial hygiene
- Range: 0.5-25.0ppm
- Quantity: 10 tubes per box
- 183U PHENOL PHENOL (0.5-25.0ppm)
- Applications:Industrial hygiene
- Range: 0.5-25.0ppm
- Quantity: 10 tubes per box
- 184S ALLYL ALCOHOL ALLYL ALCOHOL (20-500ppm)
- Applications: Leakage detection
- Range: 20-500ppm
- Quantity: 10 tubes per box
- 184S METHYL METHACRYLATE METHYL METHACRYLATE (10-160ppm)
- Applications: Pigment; adhesive; paintings
- Range: 10-160ppm
- Quantity: 10 tubes per box
- 185S PROPYLENE (50-1000ppm)
- Applications: Leakage detection
- Range: 50-1000ppm
- Quantity: 10 tubes per box
- 186 ORGANIC GAS CHECKER
- Applications: N/A
- Range: N/A
- Quantity: 10 tubes per box
- 186B ORGANIC GAS - QUALITATIVE
- Applications: Qualitative analysis, emergency and disaster scenes
- Quantity: 10 tubes per box
- Note: This qualitative detector tube enables detection of a range of organic gases as it contains different reagents at mutiple sections within the tube. The main purpose for this tube is qualitative analysis but simple quantitative analysis of the gases is also possible. This tube is of benefit where the user needs to establish firstly if there is gas within an environment and secondly, which type of gas. Therefore tube 186B is regularly used at emergency scenes.
- 187S GENERAL HYDROCARBONS (50-1400ppm)
- Applications: Safety; industrial hygiene
- Range: 50-1400ppm
- Quantity: 10 tubes per box
- 188U ISOPENTYL ACETATE (10-400ppm)
- Applications: Industrial hygiene
- Range: 10-400ppm
- Quantity: 10 tubes per box
- 189U 2-BUTANOL (4-300ppm)
- Applications: Organic solvent treating; industrial hygiene
- Range: 4-300ppm
- Quantity: 10 tubes per box
- 190U 1-BUTANOL 1-BUTANOL (5-100ppm)
- Applications: Manufacturing flotation reagent, stabilizer for solvent; industrial hygiene
- Range: 5-100ppm
- Quantity: 10 tubes per box
- 190U 1-PROPANOL 1-PROPANOL (20-300ppm)
- Applications: Safety; industrial hygiene
- Range: 20-300ppm
- Quantity: 10 tubes per box
- 190U BUTYL CELLOSOLVE BUTYL CELLOSOLVE (10-1000ppm)
- Applications: Organic solvent treating; industrial hygiene
- Range: 10-1000ppm
- Quantity: 10 tubes per box
- 190U CROTONALDEHYDE CROTONALDEHYDE (2-40ppm)
- Applications: Compound materials
- Range: 2-40ppm
- Quantity: 10 tubes per box
- 190U DIACETONE ALCOHOL DIACETONE ALCOHOL (10-250ppm)
- Applications: Fire hazard detection in paints industry; industrial hygiene
- Range: 10-250ppm
- Quantity: 10 tubes per box
- 190U DICYCLOPENTADIENE DICYCLOPENTADIENE (2-60ppm)
- Applications: Manufacturing EP rubber, unsaturated polyester, resins, coating materials and perfume
- Range: 2-60ppm
- Quantity: 10 tubes per box
- 190U ETHYL CELLOSOLVE ETHYL CELLOSOLVE (5-500ppm)
- Applications: Organic solvent treating
- Range: 5-500ppm
- Quantity: 10 tubes per box
- 190U ETHYL CELLOSOLVE ACETATE ETHYL CELLOSOLVE ACETATE (5-150ppm)
- Applications: Organic solvent treating
- Range: 5-150ppm
- Quantity: 10 tubes per box
- 190U FURFURAL FURFURAL (2-60ppm)
- Applications: Materials of Nylon 66; insecticide
- Range: 2-60ppm
- Quantity: 10 tubes per box
- 190U ISOPRENE ISOPRENE (1-16ppm)
- Applications: Industrial hygiene
- Range: 1-16ppm
- Quantity: 10 tubes per box
- 190U ISOPROPYL CELLOSOLVE ISOPROPYL CELLOSOLVE (5-350ppm)
- Applications: Safety; industrial hygiene
- Range: 5-350ppm
- Quantity: 10 tubes per box
- 190U MESITYL OXIDE MESITYL OXIDE (5-100ppm)
- Applications: Industrial hygiene
- Range: 5-100ppm
- Quantity: 10 tubes per box
- 190U METHYL CELLOSOLVE METHYL CELLOSOLVE (5-500ppm)
- Applications: Organic solvent treating
- Range: 5-500ppm
- Quantity: 10 tubes per box
- 190U METHYL CELLOSOLVE ACETATE METHYL CELLOSOLVE ACETATE (3-120ppm)
- Applications: Safety; industrial hygiene
- Range: 3-120ppm
- Quantity: 10 tubes per box
- 190U TETRAHYDROTHIOPHENE TETRAHYDROTHIOPHENE (4-100ppm)
- Applications: Odorant
- Range: 4-100ppm
- Quantity: 10 tubes per box
- 192S EPICHLOROHYDRINE (5-50ppm)
- Applications: Manufacturing Epoxy resin, Chlorinated rubber, Glycerin
- Range: 5-50ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 193S METHYL STYRENE (10-500ppm)
- Applications: Synthetic resin
- Range: 10-500ppm
- Quantity: 10 tubes per box
- 194S 1,3-DICHLOROPROPANE (10-500ppm)
- Applications: Industrial hygiene
- Range: 10-500ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
- 196S NN-DIMETHYLFORMAMIDE (1-30ppm)
- Applications: Stationary phase of chromatography
- Range: 1-30ppm
- Quantity: 10 tubes per box
- 197U 1-METHOXY-2-PROPANOL 1-METHOXY-2-PROPANOL (10-500ppm)
- Applications: Solvent; ink; lacquer; cellulose; dye etc.
- Range: 10-500ppm
- Quantity: 10 tubes per box
- 197U CYCLOHEXANONE CYCLOHEXANONE (2-100ppm)
- Applications: Organic solvent treating; industrial hygiene
- Range: 2-100ppm
- Quantity: 10 tubes per box
- 197U ISOPHORONE ISOPHORONE (5-80ppm)
- Applications: Solvent; ink; paint; lacquer; adhesive; copolymer; lag; finish; biocide
- Range: 5-80ppm
- Quantity: 10 tubes per box
- 198U METHYL CYCLOHEXANONE (2-100ppm)
- Applications: Industrial hygiene
- Range: 2-100ppm
- Quantity: 10 tubes per box
- 199U METHYL CYCLOHEXANOL (5-200ppm)
- Applications: Manufacturing Iubricating oil and liqueur; industrial hygiene
- Range: 5-200ppm
- Quantity: 10 tubes per box
- 200SA SULPHIDE ION (2-1,000ppm)
- Applications: Waste water analysis in pulp & paper mills, petroleum refineries, chemical industries, waste disposal plants, water treatment plant
- Range: 2-1,000ppm
- Quantity: 10 tubes per box
- Note: Uses immersion method by immersing part of the detector tube into the sample liquid.
- 200SB SULPHIDE ION (0.5-10ppm)
- Applications: Waste water analysis in pulp & paper mills, petroleum refineries, other chemical industries, waste disposal plants, water treatment plant
- Range: 0.5-10ppm
- Quantity:10 tubes per box
- Note: Uses immersion method by immersing part of the detector tube into the sample liquid.
201SA CHLORIDE ION (10-2,000ppm)- Applications: Detection of salt water in marine lubrication oils; impurity test; testing portable water supply
- Range: 10-2,000ppm
- Quantity: 10 tubes per box
- Note: Uses immersion method by immersing part of the detector tube into the sample liquid.
201SB CHLORIDE ION (3-200ppm)- Applications: Detection of salt water in marine lubrication oils; impurity test; testing portable water supply
- Range: 3-200ppm
- Quantity: 10 tubes per box
- Note: Uses immersion method by immersing part of the detector tube into the sample liquid.
201SC CHLORIDE ION (1-60ppm)- Applications: Detection of salt water in marine lubrication oils; impurity test; testing portable water supply
- Range: 1-60ppm
- Quantity: 10 tubes per box
- Note: Uses immersion method by immersing part of the detector tube into the sample liquid.
203S COPPER ION (1-100mg/L)- Applications: Waste water analysis in pulp & paper mills, petroleum refineries, other chemical industries, waste disposal plants, water treatment; school hygiene
- Range: 1-100mg/L
- Quantity: 10 tubes per box
Rubber ball available (optional extra)204S CYANIDE ION (0.2-5.0ppm)- Applications: KCN & NaCN in water
- Range: 0.2-5.0ppm
- Quantity: 10 tubes per box
Rubber ball available (optional extra)205SL SALINITY (0.01-0.80%)- Applications: Detection of salt water in marine lubrication oils, impurity test, testing portable water supply
- Range: 0.01-0.80%
- Quantity: 10 tubes per box
Rubber ball available (optional extra)206U CYCLOHEXANOL (5-500ppm)- Applications: Process control in synthetic rubber industry
- Range: 5-500ppm
- Quantity: 10 tubes per box
208U ISOBUTYL ALCOHOL (5-100ppm)- Applications: Detergent of paint and varnish; manufacturing Esters for fruit essence; industrial hygiene
- Range: 5-100ppm
- Quantity: 10 tubes per box
209U ISOPENTYL ALCOHOL (5-100ppm)- Applications: Stabilizer for Sodium thiosulphate hypo; industrial hygiene
- Range: 5-100ppm
- Quantity: 10 tubes per box
210U PENTYL ACETATE (10-200ppm)- Applications: Material of Acrylic resin, industrial hygiene
- Range: 10-200ppm
- Quantity: 10 tubes per boxes
2112B5022-CON Accessories - GasSense NDIR Wired Connector KitGasSense NDIR wired connector kit
2112B5022-FILT Accessories - Anti-condensation filter with manual moisture drain
Anti-condensation filter with manual moisture drain2112B5022-KIT Accessories - GasSense NDIR Calibration KitGasSense NDIR Calibration Kit
2112B5022-PUMP Accessories - GasSense NDIR Diaphragm pump (0.5l/min)
GasSense NDIR Diaphragm pump (0.5l/min)2112B5022-USB Accessories - GasSense NDIR USB Interface cableGasSense NDIR USB Interface cable
211U BUTYL ACRYLATE BUTYL ACRYLATE (2-60ppm)- Applications: Material of acrylic resin
- Range: 2-60ppm
- Quantity: 10 tubes per box
211U ETHYL ACRYLATE ETHYL ACRYLATE (5-60ppm)- Applications: Material of Acrylic resin
- Range: 5-60ppm
- Quantity: 10 tubes per box
211U ISOBUTYL ACRYLATE ISOBUTYL ACRYLATE (5-60ppm)- Applications: Industrial hygiene
- Range: 5-60ppm
- Quantity: 10 tubes per box
211U METHYL ACRYLATE METHYL ACRYLATE (2-60ppm)- Applications: Material of Acrylic resin; industrial hygiene
- Range: 2-60ppm
- Quantity: 10 tubes per box
213S TRIETHYL AMINE (0.5-20ppm)- Applications: Manufacturing emulsifier, organic solvent, waterproofing agent, dyestuff, surface activator and agricultural chemicals etc.; industrial hygiene
- Range: 0.5-20ppm
- Quantity: 10 tubes per box
214S O-DICHLOROBENZENE (5-100ppm)- Applications: Solvent insecticide; industrial hygiene
- Range: 5-100ppm
- Quantity: 10 tubes per box
215S P-DICHLOROBENZENE (10-150ppm)- Applications: Solvent insecticide; industrial hygiene
- Range: 10-150ppm
- Quantity: 10 tubes per box
216S ACETIC ACID ACETIC ACID (0.5-125ppm)- Applications: Manufacturing of cellulose acetate, rayon, vinyl acetate
- Range: 0.5-125ppm
- Quantity: 10 tubes per box
216S ACETIC ANHYDRIDE ACETIC ANHYDRIDE (1-15ppm)- Applications: Acetylating agent
- Range: 1-15ppm
- Quantity: 10 tubes per box
216S ACRYLIC ACID ACRYLIC ACID (1-50ppm)- Applications: Material of acrylic resin
- Range: 1-50ppm
- Quantity: 10 tubes per box
216S BUTYRIC ACID BUTYRIC ACID (3-60ppm)- Applications: Conflate artificial flavour; medicine; emulsifying agent
- Range: 3-60ppm
- Quantity: 10 tubes per box
216S FORMIC ACID FORMIC ACID (1-50ppm)- Applications: Manufacturing organic medicine; industrial hygiene
- Range: 1-50ppm
- Quantity: 10 tubes per box
216S ISOBUTYRIC ACID ISOBUTYRIC ACID (3-50ppm)- Applications: Disinfectant; artificial flavour; substrate for perfume; tan processing
- Range: 3-50ppm
- Quantity: 10 tubes per box
216S ISOVALERIC ACID ISOVALERIC ACID (3-50ppm)- Applications: Artificial flavour; perfume and medical uses
- Range: 3-50ppm
- Quantity: 10 tubes per box
216S MALEIC ANHYDRIDE MALEIC ANHYDRIDE (0.2-10ppm)- Applications: Material of polyester resin
- Range: 0.2-10ppm
- Quantity: 10 tubes per box
216S METHACRYLIC ACID METHACRYLIC ACID (1-50ppm)- Applications: Manufacturing soluble polymer
- Range: 1-50ppm
- Quantity: 10 tubes per box
216S N-VALERIC ACID N-VALERIC ACID (3-70ppm)- Applications: Artificial flavour; perfume; lubricant; plasticizer, medicine
- Range: 3-70ppm
- Quantity: 10 tubes per box
216S PROPIONIC ACID PROPIONIC ACID (3-50ppm)- Applications: Manufacturing propionate and ester; Nickel-electro plating solution; ester perfume; artificial flavour; medicine; cellulose solvent
- Range: 3-50ppm
- Quantity: 10 tubes per box
219S HYDRAZINE (0.05-10ppm)- Applications: Rocket fuel, corrosion protection of boiler, antioxidant
- Range: 0.05-10ppm
- Quantity: 10 tubes per box
221SA N-BUTANE (0.05-0.60%)- Applications: Combustible gas detection
- Range: 0.05-0.60%
- Quantity: 10 tubes per box
222S DIETHYL AMINE DIETHYL AMINE (1-20ppm)- Applications: Industrial hygiene
- Range: 1-20ppm
- Quantity: 10 tubes per box
222S ISOPROPYL AMINE ISOPROPYL AMINE (1-12ppm)- Applications: Safety; industrial hygiene
- Range: 1-12ppm
- Quantity: 10 tubes per box
222S TRIMETHYL AMINE TRIMETHYL AMINE (1-20ppm)- Applications: Industrial hygiene
- Range: 1-20ppm
- Quantity: 10 tubes per box
223S 2,2-DICHLOROETHYL ETHER (2-30ppm)- Applications: Industrial hygiene
- Range: 2-30ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
224SA MONOETHANOL AMINE (0.5-50ppm)- Applications: Pesticide; solvent; abstergent
- Range: 0.5-50ppm
- Quantity: 10 tubes per box
227S DIMETHYL AMINE DIMETHYL AMINE (1-20ppm)- Applications: Industrial hygiene
- Range: 1-20ppm
- Quantity: 10 tubes per box
227S ETHYL AMINE ETHYL AMINE (1-20ppm)- Applications: Industrial hygiene
- Range: 1-20ppm
- Quantity: 10 tubes per box
227S METHYL AMINE METHYL AMINE (1-20ppm)- Applications: Industrial hygiene
- Range: 1-20ppm
- Quantity: 10 tubes per box
229S N,N-DIMETHYL ACETAMIDE (5-70ppm)- Applications: Solvents for chemical reaction; refinery and resins; paint remover
- Range: 5-70ppm
- Quantity: 10 tubes per box
230SA 1,2-DICHLOROETHANE (1-110ppm)- Applications: Industrial hygiene
- Range: 1-110ppm
- Quantity:3x5 tubes (5 detector tubes and 10 pretreat tubes = 5 measurements)
232SA ETHYLENE GLYCOL (20-250mg/m3)- Applications: Industrial hygiene
- Range: 20-250mg/m3
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
232SB ETHYLENE GLYCOL (3-40mg/m3)- Applications: Industrial hygiene
- Range: 3-40mg/m3
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
233S NITRIC ACID VAPOUR (1-20ppm)- Applications: Industrial hygiene
- Range: 1-20ppm
- Quantity: 10 tubes per box
234SA FREE RESIDUAL CHLORINE (0.4-5.0ppm)- Applications: Detection of dissolved chlorine for disinfection & sterilisation of swimming pools, etc.
- Range: 0.4-5.0ppm
- Quantity: 10 tubes per box
235SA 1,1-DICHLOROETHANE (10-160ppm)- Applications: Industrial hygiene
- Range: 10-160ppm
- Quantity:3x5 tubes (5 detector tubes and 10 pretreat tubes = 5 measurements)
236SA 1,1,2-TRICHLOROETHANE (10-100ppm)- Applications: Industrial hygiene
- Range: 10-100ppm
- Quantity:3x5 tubes (5 detector tubes and 10 pretreat tubes = 5 measurements)
237S METHYL BUTYL KETONE METHYL BUTYL KETONE (5-80ppm)- Applications: Safety; industrial hygiene
- Range: 5-80ppm
- Quantity: 10 tubes per box
237S VINYL ACETATE VINYL ACETATE (5-120ppm)- Applications: Process Control in acetylene plant
- Range: 5-120ppm
- Quantity: 10 tubes per box
238S FURFURYL ALCOHOL (5-25ppm)- Applications: Material of furan resin; resin denaturant; solvent; industrial hygiene
- Range: 5-25ppm
- Quantity: 10 tubes per box
239S CARBONYL SULPHIDE (5-60ppm)- Applications: Process control in chemicals manufacturing
- Range: 5-60ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
240S SILANE SILANE (0.5-50ppm)- Applications: Industrial hygiene; semiconductor manufacturing process
- Range: 0.5-50ppm
- Quantity: 10 tubes per box
242S DIBORANE DIBORANE (0.02-5.0ppm)- Applications: Industrial hygiene semiconductor manufacturing process
- Range: 0.02-5.0ppm
- Quantity: 10 tubes per box
242S HYDROGEN SELENIDE HYDROGEN SELENIDE (0.5-20ppm)- Applications: Safety; industrial hygiene
- Range: 0.5-20ppm
- Quantity: 10 tubes per box
243U TETRAETHOXYSILANE (5-200ppm)- Applications: Industrial hygiene
- Range: 5-200ppm
- Quantity: 10 tubes per box
244U SULPHURIC ACID (0.5-5mg/m3)- Applications: Petrochemical industry; industrial hygiene
- Range: 0.5-5mg/m3
- Quantity: 10 tubes per box
245UH MITC (METHYL ISOTHIOCYANATE) (200-10000ppm)- Applications: Used for wood fumigation
- Range: 200-10000ppm
- Quantity: 10 tubes per box
245UL MITC (METHYL ISOTHIOCYANATE) (0.3-22ppm)- Applications: Soil fumigation
- Range: 0.3-22ppm
- Quantity: 10 tubes per box
245UM MITC (METHYL ISOTHIOCYANATE) (10-1500ppm)- Applications: Used for wood fumigation
- Range: 10-1500ppm
- Quantity: 10 tubes per box
247S HYDROGEN PEROXIDE (0.5-10.0ppm)- Applications: Manufacturing bleach, industrial chemicals and medicine
- Range: 0.5-10.0ppm
- Quantity: 10 tubes per box
248U ETHYL-TERT-BUTYL ETHER (1-60ppm)- Applications: Used for automobile fuel adding the ETBE in Gasoline
- Range: 1-60ppm
- Quantity: 10 tubes per box
249S 1,3-DICHLOROPROPENE (0.5-10.0ppm)- Applications: Fumigation in soil by the name of D-D
- Range: 0.5-10.0ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
250S DIMETHYL SULPHIDE (0.21-100ppm)- Applications: For Dimethyl Sulphide which is used as an odorant in LPG, food flavours, syntehtic essential oils/perfumes etc.
- Range: 0.21-100ppm
- Quantity: 10 tubes per box
251U DIESEL FUEL (0.5-30ppm)- Applications: For monitoring residual and leakage of diesel fuel, jet fuel and kerosene in storage tanks
- Range: 0.5-30ppm
- Quantity: 10 tubes per box
280S ACETYLENE . ETHYLENE - SEPARATION MEASUREMENT (C2H2: 20-300ppm; C2H4: 200-2000ppm)- Applications: Safety; industrial hygiene
- Range:C2H2: 20-300ppm; C2H4: 200-2000ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
281S OXYGEN . CARBON DIOXIDE - SEPARATION MEASUREMENT (O2: 2-10%; CO2: 1-20%)- Applications: Combustion control
- Range: O2: 2-10%; CO2: 1-20%
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
282S HYDROGEN SULPHIDE - MERCAPTANS - SEPARATION MEASUREMENT- Applications: Safety; industrial hygiene
- Range: H2S: 1-30ppm; R.SH: 0.5-5ppm
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
290CN HYDROGEN CYANIDE IN BLOOD (2-30mg/L)- Applications: Screening test for identification of cause of death
- Range: 2-30mg/mL
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
Documents
290CO CARBON MONOXIDE IN BLOOD (20-90%COHb)- Applications: Screening test for identification of cause of death
- Range: 20-90%COHb
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
Documents
290EA ETHYL ALCOHOL IN BLOOD (0.2-2.0mg/mL)- Applications: Screening test for identification of cause of death
- Range:0.2-2mg/mL
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
Documents
290HS HYDROGEN SULPHIDE IN BLOOD (0.1-1.0μg/mL)- Applications: Screening test for identification of cause of death
- Range: 0.1-1.0μg/mL
- Quantity:2x5 tubes (5 detector tubes and 5 pretreat tubes = 5 measurements)
Documents
290P DETECTOR TUBE FOR CRIME INVESTIGATION- Applications: Discriminate Gasoline and/or Kerosene
- Range: N/A
- Quantity: 10 tubes per box
Documents
290PII DETECTOR TUBE FOR CRIME INVESTIGATION- Applications: Discriminate Gasoline and/or Kerosene
- Range: N/A
- Quantity: 10 tubes per box
Documents
290PQ PARAQUAT DICHLORIDE IN BLOOD- Applications: Screening test for identification of cause of death
- Range: N/A
- Quantity:10 tubes per box
Documents
296HA 296HA H2S Generation Tube- Applications: H2S generation tube
- Quantity:10 tubes per box
This tube is for use with the H2S-1/H2S-2 Calibration Gas Set for Hydrogen Sulphide which is designed for generating calibration gas for H2S detection monitors or H2S detector tubes.Documents
296KY 296KY H2S Absorbent Tube- Applications: H2S absorbent tube
- Quantity:10 tubes per box
For use with the H2S-1/H2S-2 Calibration Gas Set for Hydrogen Sulphide, this absorbent tube is used for disposing of surplus hydrogen sulphide gas after calibrating hydrogen sulphide measuring instruments.Documents
301 AIR FLOW INDICATOR TUBE- Applications: Exhaust & heat ventilation
- Quantity: 10 tubes per box
- Note: The air flow tube reacts with vapour in the air and generates a harmless white smoke. The tube is used to check velocity and direction of air flow in rooms and for verifying efficiency and effectiveness of ventilation outlets. The 301 tube is for use with models AS-1, AS-2 or AS-3 Air Flow Indicators (not included).
Downloads
600SP COMPRESSED BREATHING AIR (CO) (2.5-100ppm)- Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
- Range: 2.5-100ppm Carbon Monoxide CO
- Quantity: 10 tubes per box
- Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
601SP COMPRESSED BREATHING AIR (CO2) (100-3,000ppm)- Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
- Range: 100-3,000ppm Carbon Dioxide CO2
- Quantity: 10 tubes per box
- Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
602SP COMPRESSED BREATHING AIR (OIL MIST) (0.3-5mg/m3)- Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
- Range: 0.3-5mg/m3 Oil Mist
- Quantity: 10 tubes per box
- Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
603SP2 COMPRESSED BREATHING AIR (H2O) (100-1000ppm)- Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
- Range: 100-1000ppm water vapour
- Quantity: 10 tubes per box
- Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
603SPA COMPRESSED BREATHING AIR (H2O) (20-160mg/m3)- Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
- Range: 20-160mg/m3 water vapour
- Quantity: 10 tubes per box
- Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R
604SP COMPRESSED BREATHING AIR (O2) (2-24%)- Applications: Testing impurities in scuba, rescue cylinders and works air charge compressors
- Range: 2-24% Oxygen O2
- Quantity: 10 tubes per box
- Note: For use with a breathing air sampling system, such as AIRCHECK or P-41R. A 50mL plastic syringe and a 1m vinyl tube are optional accessories for 604SP (not included).
710 FORMALDEHYDE (0.01-0.48ppm)- Applications: Indoor Air Pollutants
- Range: 0.01-0.48ppm
- Quantity: 20 tubes per box
710A FORMALDEHYDE (0.05-2.00ppm)- Applications: Indoor Air Pollutants
- Range: 0.05-2.00ppm
- Quantity: 20 tubes per box
713 FORMALDEHYDE (0.01-0.50ppm)- Applications: Indoor Air Pollutants
- Range: 0.01-0.50ppm
- Quantity: 20 tubes per box
721 ETHYL BENZENE ETHYL BENZENE (0.05-1.20ppm)- Applications: Indoor Air Pollutants
- Range: 0.05-1.20ppm
- Quantity: 2x10 tubes per box
721 TOLUENE TOLUENE (0.05-1.00ppm)- Applications: Indoor Air Pollutants
- Range: 0.05-1.00ppm
- Quantity: 2x10 tubes per box
721 XYLENE XYLENE (0.1-1.4ppm)- Applications: Indoor Air Pollutants
- Range: 0.1-1.4ppm
- Quantity: 2x10 tubes per box
730 P-DICHLOROBENZENE (0.01-0.40ppm)- Applications: Indoor Air Pollutants
- Range: 0.01-0.40ppm
- Quantity: 2x10 tubes per box
740 NITROGEN DIOXIDE (0.01-0.20ppm)- Applications: Atmospheric environment measurement
- Range: 0.01-0.20ppm
- Quantity: 10 tubes per box
750 TRICHLOROETHYLENE (30-920ug/m3)- Applications: Atmospheric environment measurement
- Range: 30-920μg/m3
- Quantity:2x10 tubes per box
760 TETRACHLOROETHYLENE (30-920ug/m3)- Applications: Atmospheric environment measurement
- Range: 30-920μg/m3
- Quantity: 2x10 tubes per box
770 HYDROGEN FLUORIDE (0.05-1.0ppm)- Applications: Industrial hygiene
- Range: 0.05-1.0ppm
- Quantity: 10 tubes per box
Documents
77S WATER CONTENT IN SOLVENT (10-400mg/L)- Applications: Detection of water content in solvent
- Range: 10-400mg/L
- Quantity: 10 tubes per box
Documents
800B CHARCOAL TUBE (NIOSH-TYPE)- Applications: Industrial hygiene
- Quantity: 20 tubes per box or 50 tubes per box
- Note: The charcoal tube is for sampling organic solvent vapours in air, primarily for use in industrial hygiene. This tube conforms to NIOSH requirements.
Downloads
801 SILICA-GEL TUBE- Applications: Industrial hygiene
- Quantity: 10 tubes per box
- Note: 801 is designed for sampling organic solvents in environmental air, particularly for polar solvents such as Methanol and Acetone which cannot be sufficiently adsorbed onto charcoal tube no. 800B. Organic solvent vapour is adsorbed onto the silica gel, whilst passing through the tube. Adsorbed solvent is recovered with a desorption solvent, followed by gas chromatographic analysis, and the tube will change from blue to pink.
Downloads
900NHH AMMONIA IN ART GALLERIES-MUSEUMS (10-8μg/m3)- Applications: For cultural property protection in art galleries and musuems
- Range: 10-80μ/m3
- Quantity: 10 tubes per box
901NHL AMMONIA IN CLEAN ROOM (1-12μg/m3)- Applications: For clean room monitoring of semiconductor industries
- Range: 1-12μg/m3
- Quantity: 10 tubes per box
910 ORGANIC ACID (20-800μ/m3)- Applications: For cultural property protection in art galleries and musuems
- Range: 20-800μ/m3
- Quantity: 10 tubes per box
AIRCHECK AIRCHECK Compressed Breathing Air Sampling KitAir quality sampling kit for measuring impurities in compressed breathing air in scuba and rescue cylinders.
AP20 Sampling System Kitagawa Gas Detector AP20 Sampling PumpHighly accurate and easy to use handheld pump for use with Kitagawa Gas Detector Tubes.
AS-1 AS-1 Air Flow IndicatorFor spot testing velocity and direction of air flow.
AS-2 AS-2 Air Flow IndicatorFor continuous measurement to determine velocity and direction of air flow.
AS-3 AS-3 Extension Air Flow IndicatorBattery powered pump with 2m extension rod to determine velocity and direction of air flow.
B-191 Tip Cutter B-191 Tip CutterPlastic container with flip lid for collecting discarded detector tube ends.
Boring Bar Boring Bar for SPG-1 Sampling ProbeBoring Bar tool to dig appropriate height of hole for the SPG-1 Soil Sampling Probe.
DS-110W DS-110W Detector ScopeA small instrument that magnifies and illuminates the scale on Kitagawa Gas Detector Tubes for easy reading.
H2S-1 H2S-1 Calibration Gas Set for Hydrogen SulphideDesigned for generating calibration gas for H2S detection monitors.
H2S-2 H2S-2 Calibration Gas Set for Hydrogen SulphideDesigned for generating calibration gas for H2S detection monitors.
NEEDLEX NEEDLEXAn extraction needle for collecting Volatile Organic Compounds (VOCs) in conjunction with the AP20 sampling pump.
P-10FG Flue Gas Samplers P-10FG Flue Gas SamplerFlue gas sampler with sampling probe, suction pump and sampling pump in metal carrying case.
P-20 P-20 Measurement Set for Chlorocarbons in DrainageSet to determine concentration of solvent in drainage and underground water by measuring head space gas.
P-24AP P-24AP Measurement Set for Chlorocarbons in DrainageKit for measurement of solvent concentration in drainage and underground water by measuring the head space gas.
P-41R P-41R Compressed Breathing Air Sampling KitHigh specification air quality sampling kit for measuring impurities in compressed breathing air cylinders and outlets of air-charge compressors.
P-50 P-50 - Gas Hazard Kit for Toxic and Hazardous Gas DetectionAt an emergency scene, this kit enables hazardous gases to be established quickly.
P-50 Ultra P-50 Ultra - Gas Hazard Kit for Toxic and Hazardous Gas DetectionA comprehensive kit for rescue and safety personnel to establish toxic/hazardous gases and levels quickly and easily.
SF-40 Hot Air Probe SF-40 Hot Air ProbeA probe to measure emission gases in temperatures of up to 600 degrees centigrade.
SFH-01 Hot Air Probe Holder SFH-01 Hot Air Probe HolderThis holder connects an SF-40 hot air probe with the AP20 sampling system and tubes to provide additional stability.
SH-10N Extension Hoses 10 Meter Extension HoseRubber extension hose for remote or confined area gas sampling for use with AP20 sampling system.
SH-5N Extension Hose 5 Meter Extension Hose5m rubber extension hose for remote or confined area gas sampling, for use with AP20 sampling system.
SPG-1 Soil Sampling Probe SPG-1 Sampling Probe for Gases in SoilSoil Sampling Probe for sampling gases and organic solvents in soil.
SR-200R Extension Rod SR-200R Extension Sampling RodFor vertical and horizontal gas detection in unreachable positions of up to 2 metres.
SS-100 Glass Syringe SS-100 100ml Glass SyringeSyringe for diluting high concentration gases or for high temperature gases.
Starter Kit ** Kitagawa Gas Detection Starter Kit - Special Offer! **Starter Kit including highly accurate and easy to use handheld AP-20 Sampling Pump, 5 boxes of standard Kitagawa Gas Detector Tubes, manual, carrying case and spares.
TWS-201 TWS-201 Tube Warming SystemEnables use of the Kitagawa AP20 pump and tubes to sample gases in cold temperatures down to -20oC.
